Back to Blog
How-to Guides 2026-11-17 Savotta – Load carrying equipment and sustainment systems 0 views

NVD Counterweight Kit: Balance and Fit on a Helmet

NVD Counterweight Kit: Balance and Fit on a Helmet

Learn how the NVD counterweight kit's four 150 g discs help balance night vision on a helmet, and how to place them in your counterweight pouch for a stable fit.

Start with the weight, not the pouch

A night vision device on the front of a helmet shifts the load forward. The NVD counterweight kit gives you four 150 g lead discs, 600 g in total, to place at the rear of the helmet and bring the balance back. The discs are fully coated and compatible with Savotta counterweight pouches, so the kit is a straightforward way to tune helmet weight distribution without changing the device itself.

This guide covers how to think about the kit, how to place the discs in a pouch, and what to check once it is on your helmet. It does not cover mounting a specific night vision device, because that depends on your helmet and shroud.

What the kit contains

  • NVD counterweight kit: A set of four 150 g lead weight discs, fully coated. Four separate discs let you add or remove weight in 150 g steps instead of committing to one fixed block.
    NVD counterweight kit
    NVD counterweight kit
  • NVD counterweight kit: Each disc weighs 150 g and the kit in total weighs 600 g, enough to counter the weight of most night vision devices. The 600 g total is the starting point for judging whether the kit suits your device and helmet setup.
  • NVD counterweight kit: The weight disc model belongs to Finnish optronics manufacturer Senop, and the discs are used as counterweights for their night vision devices. The discs are intended for night vision counterweight use, not general ballast.

How to place the discs in your counterweight pouch

The kit is designed to work with Savotta counterweight pouches. Load the discs into the pouch before you attach it to the helmet, so you can distribute them evenly rather than letting them bunch at one end.

If your pouch has separate slots or compartments, spread the four discs across them. If it has one compartment, stack them flat and centered. Even distribution keeps the pouch from pulling to one side and makes the helmet feel more stable when you turn your head.

Start with all four discs if your night vision device is mounted and you feel forward bias. If the rear feels too heavy, remove one disc at a time and recheck. The 150 g steps are coarse enough that small adjustments are easy to feel.

A fit check after mounting

  1. Check front-to-back balance: With the helmet on and the device mounted, the helmet should not tip forward on its own. If it does, add weight at the rear or move the pouch farther back if your helmet allows.
  2. Check side-to-side level: Look at the helmet from the front. The pouch should sit centered at the rear. If it sits off-center, reposition the discs inside the pouch before adjusting the pouch itself.
  3. Check the pouch stays put: Turn your head slowly left and right. The pouch should not swing or slide. If it does, review how it is attached to the helmet; the supplied information for this kit does not specify a mounting method, so follow the pouch's own instructions.
  4. Check comfort at the rear: The discs are rigid. If the pouch presses into the back of your head, try a different pouch position or fewer discs rather than forcing the fit.

How much weight do you actually need?

The kit provides 600 g total, which the catalog describes as enough for most night vision devices. That is a useful starting point, but the right amount depends on your device, mount, and helmet shell. Use the smallest number of discs that keeps the helmet balanced. Extra weight at the rear can make the helmet feel heavy overall even when it is balanced front-to-back.

If you are unsure, begin with two discs, check the balance, and add from there. Keep the unused discs stored together so you can adjust later without searching for them.

Handling and storage

  • NVD counterweight kit: Warning – contains lead. Lead is toxic and exposure to it is harmful. Handle the discs by the coated surface, keep them out of reach of children, and wash your hands after handling.
  • NVD counterweight kit: Dispose of as hazardous waste, according to your local laws and regulations. Do not put worn or unwanted discs in household waste.

When the kit is the right choice

The NVD counterweight kit makes sense if you already use a Savotta counterweight pouch and want a simple, adjustable way to add rear weight. It is also a practical spare or replacement set if you need to change the balance of more than one helmet setup.

It is not a universal helmet accessory: the discs are designed for counterweight pouches, and the supplied information does not describe direct attachment to a helmet without a pouch. If you do not have a compatible pouch, sort that out first so the discs have a secure place to sit.

Related Articles

Customer Service
Home
Products
Cart
Profile