How to Mount a 2-Mag Pouch on PALS Webbing
By Savotta – Load carrying equipment and sustainment systems | Published: 2026-10-13
Category: How-to Guides
A step-by-step guide to mounting a Savotta 2-mag pouch on PALS webbing, with checkpoints for secure attachment and placement tips for your loadout.
Quick answer
To mount a 2-mag pouch on PALS webbing, weave the pouch's attachment straps horizontally through the PALS rows, then secure them with the tuck tab or hook-and-loop closure. Ensure the pouch sits tight against the platform and test retention with weighted magazines before field use.
Prepare your platform and pouch
Before mounting, clear the PALS area of any obstructions and decide on pouch placement. For a 2-mag pouch like the Savotta 2-mag pouch, AK, consider whether you need quick access with your dominant hand or a more concealed position. The pouch's PALS and belt compatible attachment system gives you flexibility, but proper alignment is key to a secure fit.
Weave the attachment straps
Start by threading the pouch's straps through the PALS webbing. Most pouches use two vertical straps that weave horizontally through the rows. Push the strap through the first row, then skip a row and push it back through the next to create a interlocking weave. This prevents the pouch from shifting. The Savotta 2-mag pouch features a tuck tab and hook-and-loop closure, so after weaving, fold the strap end back onto itself and secure it with the hook-and-loop. Ensure the strap is taut and the pouch sits flush against the platform.
Check and adjust retention
Once mounted, test the pouch by inserting two AK/RK 30-round magazines. The lid should close securely with the hook-and-loop, and the pouch should not sag or bounce. If it feels loose, re-weave the straps more tightly or adjust the placement to use additional PALS rows. Remember, this pouch is designed for dependable carry in any conditions, so a snug fit is essential.
Step-by-step mounting instructions
- Choose the mounting position: Decide where the pouch will sit on your plate carrier or belt. For a 2-mag pouch, common placements are the front cummerbund or belt. Ensure the PALS rows align with the pouch's straps. Checkpoint: The pouch should be reachable with your dominant hand without interfering with other gear.
- Weave the straps through PALS: Starting from the top, thread the first strap horizontally through a PALS row, then skip a row and thread it back through the next row. Repeat for the second strap. Pull the straps tight to eliminate slack. Mistake to avoid: Weaving only through one row can cause the pouch to flop; always interlock at least two rows.
- Secure the closure: After weaving, fold the strap ends back and press them onto the hook-and-loop patches. Ensure the tuck tab is fully inserted if present. The pouch should now be firmly attached. Checkpoint: Tug on the pouch gently; it should not move independently of the platform.
- Test with magazines: Insert two loaded magazines and close the lid. Shake the platform mildly to check for movement. Adjust strap tension if needed. Next step: If the pouch shifts, re-weave with tighter tension or consider adding a strap keeper.
Product facts
- 2-mag pouch, AK: Magazine pouch for two regular AK/RK 30 round magazines. Tuck tab and hook and loop closure, PALS and belt compatible attachment system. This pouch is built for secure, protected carry of AK magazines, and its PALS compatibility makes it versatile for plate carriers or belts.
