Back to Blog
How-to Guides 2026-11-20 Savotta – Load carrying equipment and sustainment systems 0 views

DIY 2M WB SR Split-Bar: How to Cut and Fit for Custom Gear

DIY 2M WB SR Split-Bar: How to Cut and Fit for Custom Gear

Learn how to cut and install the 2M WB SR split-bar buckle for custom gear attachments. Compatible with ITW Classic buckles, this 25 mm male buckle is perfect for modifying straps and packs.

What You Can Do with a Split-Bar Buckle

The 2M WB SR split-bar buckle is a 25 mm male side release buckle designed for field repairs and gear modifications. Its split-bar design lets you attach it directly to webbing without sewing, making it a quick way to add a buckle to a strap or create a new attachment point on your pack.

These buckles are compatible with ITW Classic series side release buckles, the same hardware used on Savotta Jääkäri backpacks. This means you can clip a Jääkäri side compression strap onto a split-bar buckle, turning a simple buckle into a modular connection point.

Cutting the Webbing to Fit

To install the split-bar buckle, you need a length of 25 mm webbing. The buckle's split bar accepts the webbing through its center slot, so you do not need to sew or use adhesive. Simply cut the webbing to your desired length, leaving enough to pass through the buckle and fold back if needed.

For a secure fit, cut the webbing end at a slight angle to make threading easier. Melt the cut edge with a lighter to prevent fraying. The split bar holds the webbing firmly once the buckle is snapped shut, but you can also add a stitch or two for extra security if your project requires it.

Installing the Split-Bar Buckle on a Strap

  1. 1. Prepare the webbing: Cut a piece of 25 mm webbing to the desired length. Angle the cut and melt the edge to prevent fraying.
  2. 2. Thread the webbing through the split bar: Insert the webbing through the center slot of the split-bar buckle. Pull it through until the buckle sits at the desired position.
  3. 3. Snap the buckle closed: Fold the webbing back over the split bar and snap the male buckle into a compatible female ITW Classic buckle. The webbing is now held in place by the buckle's pressure.
  4. 4. Secure the webbing (optional): For permanent attachment, sew a bar tack or add a drop of glue on the webbing tail. This is optional but recommended for load-bearing applications.

Adding a Quick Attachment Point to Your Pack

The split-bar buckle can also be used to add a male side release buckle to your gear. For example, you can attach one to a Jääkäri backpack's side compression strap or to a PALS webbing loop. The buckle then serves as a quick connection point for accessories that have a female ITW Classic buckle.

Because the split-bar buckle is compatible with existing Jääkäri hardware, you can create custom attachment points without modifying your pack permanently. This is useful for adding a water bottle holder, a radio pouch, or any accessory that uses side release buckles.

Split-Bar Buckle at a Glance

  • 2M WB SR split-bar, 25 mm, male: Split-bar buckles are widely used as quick field repair buckles, but these can also be used to modify your gear by adding quick attachment points for male side release buckles. This confirms the buckle serves both repair and customization roles, making it a versatile component for DIY gear projects.
    2M WB SR split-bar, 25 mm, male
    2M WB SR split-bar, 25 mm, male
  • 2M WB SR split-bar, 25 mm, male: They are compatible with ITW Classic series side release buckles, which we have used for years on all our Jääkäri backpacks. Compatibility with Jääkäri hardware means you can integrate the split-bar buckle into existing pack systems without replacing buckles.
  • 2M WB SR split-bar, 25 mm, male: This means you can take the side compression strap of any Jääkäri backpack and clip it onto one of these. This illustrates a practical use case: creating a modular connection point for compression straps or accessories.

What the Supplied Information Does Not Settle

The supplied facts do not specify a maximum webbing thickness or recommended load limit for the split-bar buckle. The buckle is designed for 25 mm webbing, but the exact breaking strength is not stated. For heavy loads, consider sewing the webbing tail for extra security.

Color options include green, black, and brown, so you can match your gear. The buckle is sold individually, so order enough for your project.

Related Articles

Customer Service
Home
Products
Cart
Profile